Fixed rear beds and island beds are some of the trickiest cushion sets to get right, because unlike a simple rock and roll bed or a dinette that folds flat, a permanent motorhome bed is often built around wardrobes, wheel arches, and access steps that break the mattress area into several irregular shaped pieces. This guide focuses specifically on made to measure cushions for these fixed and island bed layouts, covering how multi-piece sets are planned, where corner cuts and access gaps typically fall, and what to think about when choosing cover style and topper depth.

WHY FIXED AND ISLAND BEDS NEED A DIFFERENT APPROACH TO CUSHION PLANNING

A rock and roll bed or a dinette conversion typically follows a fairly standard rectangular or near rectangular shape, because it has to fold or slide as a single unit. A fixed rear bed or island bed has no such constraint, so manufacturers frequently shape the mattress area around fitted furniture instead of the other way round. It is common to find a notch cut for a wardrobe corner, a stepped access gap at the foot of the bed for getting in and out, or a slight taper along one side where the bed narrows to clear a wheel arch below.

Because of this, a made to measure bed cushion set for a fixed or island layout is rarely a single rectangle. It is usually planned as several pieces that sit together to form the full sleeping area, each cut to its own precise shape, with covers that either zip together at the seams or sit as clearly defined separate cushions depending on how the original bed was designed.

HOW A MULTI-PIECE BED IS TYPICALLY BROKEN DOWN

Most fixed and island beds fall into one of a small number of common layouts: a full width single piece where space allows, a two piece split down the centre line for easier handling and airflow underneath, or a three or four piece configuration where a corner cut-out, access step, or a fitted wardrobe divides the mattress area into distinct shapes. Identifying which of these your bed follows is the first step in any made to measure order.

HOW TO MEASURE A FIXED OR ISLAND BED FOR MADE TO MEASURE CUSHIONS

Once you have a rough outline of your bed shape, measurements should be taken piece by piece rather than as one overall length and width. For each individual section, measure the longest length, the widest point, and note any diagonal or angled edge separately, since a corner cut is rarely a perfect right angle. It also helps to measure the depth of your existing mattress or cushion, since fixed bed cushions are often deeper than seating cushions to give a proper night's sleep rather than simply daytime seating comfort.

Where a wardrobe or step creates a notch in the bed shape, measure both the width and the depth of that notch independently, as even a small error here can mean a finished cushion either fails to reach the wardrobe edge cleanly or is cut slightly too far and catches on the unit each time the bed is used.

WHY PHOTOGRAPHS MATTER AS MUCH AS MEASUREMENTS

Numbers alone rarely capture an irregular bed shape accurately, which is why we always ask customers ordering fixed or island bed cushions to send photographs from directly above the bed alongside their measurements. A straight down photograph showing the full outline, taken with the existing mattress or cushions still in place as a size reference, lets our team cross check the shape against your written measurements before cutting begins.

CHOOSING COVER STYLE AND FABRIC FOR A FIXED BED

Bed cushions see different use to seating cushions, since they are compressed under body weight for hours at a time rather than briefly sat on, so cover fabric and construction matter just as much as the cut of the foam beneath. A zip-off cover style makes future cleaning and replacement far simpler, since the cover can be removed without disturbing the foam pieces underneath, and is worth requesting specifically if your current bed cushions do not already have this feature.

Our fabric range spans a VIBRANT PALETTE for a bright, energetic bedroom feel, a DARK TONED selection for a calmer and more restful finish, RICH HUE options for a warmer and more premium look, and NEUTRAL SHADE fabrics that suit almost any decor. For those who prefer pattern, a DESIGNER MOTIF, an ABSTRACT ART STYLE print, or a CONTEMPORARY PATTERN are all available, and every option can be ordered as a swatch first through our fabric samples collection so you can check how it feels before committing to a full bed set.

TOPPER DEPTH AND COMFORT FOR EVERYDAY SLEEPING

Because a fixed bed is used every night rather than occasionally like a rock and roll bed, many owners choose a deeper foam profile or an additional topper layer for extra comfort. Select your preferred size from the options list to match your existing base depth, or speak to our team about a topper layer if you want to increase comfort without replacing the full cushion set beneath.

COMPARISON: FIXED AND ISLAND BED CUSHIONS VERSUS ROCK AND ROLL BED CUSHIONS

WHY OWNERS CHOOSE LUXCAMPERVANS FOR MADE TO MEASURE BED CUSHIONS

• Multi-piece bed sets cut to match your exact fixed or island bed shape, including corners and access steps
• Photograph and measurement cross checking before any cutting begins
• Zip-off cover options available for easier cleaning of nightly used bedding
• Fabric ranges spanning a VIBRANT PALETTE, DARK TONED, RICH HUE, and NEUTRAL SHADE, plus DESIGNER MOTIF, ABSTRACT ART STYLE, and CONTEMPORARY PATTERN options
• Free fabric samples so you can check colour and texture before ordering
• Handcrafted in the UK by a team experienced with irregular motorhome bed shapes

FREQUENTLY ASKED QUESTIONS ABOUT MADE TO MEASURE MOTORHOME BED CUSHIONS

LEAD TIME: 10 - 14 WORKING DAYS